веданне прыкладанняў

веданне прыкладанняў 

I.  кітайскія і міжнародныя стандарты VCI ўпаковачных матэрыялаў



Нашы прадукты Стандартны

VCI паперы



8135 TL


JIS Z 1535-1991

8135 TL

VCI Пластыкавая плёнка



GB / T19532-2004


8135 TL

II. Выкарыстанне матэрыялаў VCI
The amount of VCI paper or VCI plastic film is equal to the surface area of the enclosing item in general. When applying VCI powder, the amount of VCI powder shall not be less than 35g/m3.
III.  Application methods of VCI packaging materials
There are three application methods of VCI packaging materials.
1. The inner packaging materials:  The parts are wrapped with VCI paper or VCI plastic film without any other material between the part and VCI materials.
2. The VCI powder can be used by hanging bag or spraying powder so that VCI can spread to surface of metal.
3. Падзел паміж пластамі VCI матэрыялаў: у ізаляцыі борце кардоннай скрынцы з выкарыстаннем VCI пакавальнага матэрыялу, за выключэннем таго, у кардоннай скрынцы выраўнаванай з VCI ўпаковачных матэрыялаў, у кожным пласце ізалявальнай пласціны на ніжняй паверхні таксама патрабуецца для абліцоўвання VCI ўпаковачных матэрыялаў
нутравенна Якія фактары VCI матэрыялаў з выкарыстаннем эфекту залежыць?
1. The corrosion inhibition ability of VCI material itself, namely the volatilization rate of volatile corrosion inhibitor.
2. The degree of Protection required for a part, should be governed by its material, structure, precision .
3. The part should be sealed by VCI materials, the better sealing condition and the longer rustproof period.
V. What shall be paid attention to when applying VCI materials?
1. Select corresponding VCI materials according to component of part.
2. Parts containing plastic, painted, or rubber should not be packaged with VCI materials until passed the compatibility test.
3. Metal parts shall be cleaned and dried before applying VCI materials.
VI.  Storage condition of VCI materials
1. VCI materials shall be well sealed and stored in a cool dry area.
2. The packaged VCI materials shall not be opened until ready for use.
3. In continuous preservation operation, the period of VCI materials exposed to open air shall be less than 8 hours.
VII. To protect Metal from corrosion is a systems engineering
During production, process interval, shipment of metal part, it is very necessary to set up management and technical requirement about metal corrosion. If one link in the production chain occurs corrosion, the damage will not be saving. The company will lose much. So the management of metal corrosion is a systems engineering. We shall prevent metal part from corrosion since the total life and every process of metal part.
VIII. Technological process of rustproof packaging
cleaning, drying, rust protection, packaging


  • * КАПЧА: Калі ласка, абярыце Дом

  • * КАПЧА: Калі ласка, абярыце аўтамабіль

WhatsApp Інтэрнэт-чат!